|
Specifications
|
Inch |
mm |
|
Overall Size
|
20" x 22" x
22"
|
500 x 558 x 558mm
|
|
Table Size
|
6.0" x
14.5"
|
152 x 355mm
|
|
X,
Y, Z Axis
Travel
|
12.0"
x 9.0" x 9.0"
|
300
x 228 x 228mm
|
|
Feed Rates
|
.1 to 150 ipm linear
.1 to 50 ipm
3-axis simultaneous
|
|
|
Stepper
Motors
|
200
steps per revolution in full step mode, rated at 250
oz. in.
|
|
Drivers
|
Standard
Step Modes: Full, half
Upgrade
Controller Option: Micro stepping modes up to 12,800
steps per revolution (1 step, 1/2 step, 1/4
step, 1/8 step, and 1/64 stepping modes)
|
|
Resolution
Modes
|
Standard: .0005"
full step, .00025 half step
Upgrade Controller
Options: .000125" 1/4step, .0000625"
1/8 step, .0000078125" in 1/64 step
|
|
Table
Mechanism
|
Dual linear ball
bearing slides on each axis, sealed. THK (tm)
linear slides - SSR15
series with new
"Caged-Ball" technology
|
|
Drive
Mechanism
|
ACME lead screw,
zero-backlash nut.
|
|
Hold Down
Type
|
Table top
1/4"-20 mounting holes, 1" centers
|
|
Spindle
System
|
Permanently
lubricated bearings, MT#1
|
|
Spindle Motor
|
1/2 horse power, 110
or 220 VDC on/off programmable
|
|
Spindle
Speeds
|
Variable 200 to 3,500
rpm, user select / computer controlled spindle
on/off
|
|
Spindle
Rotation
|
Spindle manually
rotates 90 degrees in both directions
|
|
Tool Chuck
|
3/8 inch End Mill
Holder, WW Collets
|
|
Machine
Weight
|
85 lbs.
|
40
Kg
|
|
Electronics
|
|
PC Interface
|
Serial,
RS-232, com1, com2, or com3
|
|
Drive Type
|
Bi-polar
chopper, 2 amp
|
|
Number of
drives
|
3, with 3-axis
simultaneous control (optional 4th axis)
|
|
Power Input
|
110 VAC (220
VAC), converts to 40 VDC
|
| Memory
Type |
non volatile memory, needs use of computer to run
part programs and control machine |
|
Interface
|
TTL signal
from serial port (RS-232). All cables supplied
|
| Input
Logic |
Up to 8 input TTL signals |
|
Output Logic
|
Up to 8 output
for limit, home, or safety switches.
|
|
| |
|
The Mini-Mill/3 Package
- Vertical and horizontal milling -
standard
- Three axis multi surface milling,
simultaneous
- Computer interfacing with cabling
- Standard accessory kit with one end
mill; 3/8" end mill holder
- Industrial standard
CNC control software
- Hold-down set
- Safety shield
- Covers on all axes
- One year warranty on parts and labor
- Unlimited telephone and internet support
Total
Mini-Mill 3, $9,500.00
|
 
Minitech uses THK
linear slides on all axes of the CNC Mini-Mill/3. THK is
known as the industry leader and highest quality manufacturer of LM
systems. This technology is used on the very best CNC machines, and only
Minitech uses this technology for Desktop CNC machines.
|
| |
Options:
- Full Enclosure
Systems
- Drilling - with optional Jacobs drill
chuck
- Boring - with optional boring bar and
tool
- 4th
Axis milling - with optional rotary table with tailstock accessory
- 3D
CAD and CAD/CAM software, low cost solutions
- Machinist vise and other tooling
packages
- CNC and CAD/CAM curriculum and training
packages
- High
speed/torque spindles, and wood router attachments
- New DC Digital Servo Controls and
Motors
- Customize your
machine - we can increase the travels of this machine. Call our
friendly staff to discus your machine configuration.
|
Benefits
of the Mini-Mill/3
- Model and jewelry making
- Mold, tool and die making
- CNC and CAD/CAM training
- Part fabrication from small to large
quantities
- Rapid prototyping, from design to
finished part at your desk.
- Low Cost Affordable Solution
- Easy to understand and install
- Durable components for long-lasting
reliable performance
- Machine posted CAM files from any CAM
software
- Learn and use actual CNC commands
- Complete desktop manufacturing approach
|
| |
Accessories
- Milling Machinist Kit
- Mini-Mill
Enclosure
- Step
Block Clamping Set
- Vise
Clamp Set
- Mini-Rotary
Table
- Milling
Collet Set
- 3/8"
End Mill Holder
- Wood
Router Spindle
- High
Speed Spindle
- NSK
- Quick
Change Tool Holder
- Machinist
Kit
- Materials
& Warranties
Software
|
Software:
(Included)
CNC
Software
Controls
the movements and operations of the Mini-Mill/3
-
Windows
XP Controlled
-
Unlimited
part program size capability.
-
Imports
CAD DXF files, and posted CAM file from various CAM software.
-
Simultaneous
three-axis control, with 4th axis option.
-
Industrial
standard G & M codes assure real world implementation.
-
Supports
I/O - up to 8 input and 8 output signals. M code assigned by
|
| |
