Mini-Mill 4

Available 3,4 or Five Axis.

mill_4The Mini-Mill 4, is not so mini.. it is the largest true Tabletop CNC on the market today. Built with the same quality components as the Mill 3 and GX, it's large table and travels offer plenty of space for special fixtures and parts.

24" X, 10" Y and 10" Z Travels

Huge 30" long by 6" wide table

 

 

The Mill 4 Series offers a great platform to tailor a machine to meet your production or research requirements. We build each Mill 4 to the customers specifications.

Specifications 3, 4 or 5 Axis, ATC,

Over size 36" x 30" x30"
X Axis Travels 24"
Y Axis Travels 10"
Z Axis Travels 10"
Table Top 30" x 6"
Feedrates .1" to 40" ipm simultaneous / 150 ipm linear
Stepper Motors 200 steps per revolution, 250 oz/in DC
Slides (ways) Dual Linear Thompson Sleeve Type
Screws THK precision ground, preloaded sealed 5 pitch
Resolution Standard: .0005" full step / .00025" half step
Micro: .000125" 1/4 step. 0000625" 1/8 step
Hold Down Provisions Table =1/4-20 tapped mounting holes, 1" centers
Spindle See Spindle options
Spindle RPM See Spindle options
Spindle Rotation Can be manually rotated side to side 90 degrees
Tool Chuck Size Based on Spindle
Power Requirement 115 VAC 60 hz or 110 to 220 VAC 50 HZ
Weight 125 Lbs.

Electronics

PC Interface

  Serial, RS-232, com1, com2, or com3

Drive Type

  Bi-polar chopper, 3.5 amp with micro-stepping settings

Number of drives

  3, with 3-axis simultaneous control (optional 4th axis)

Power Input

  110 VAC (220 VAC), converts to 40 VDC

Memory Type   non volatile memory, needs use of computer to run part programs and control machine

Interface

  TTL signal from serial port (RS-232).  All cables supplied

Input Logic   Up to 8 input TTL signals

Output Logic

  Up to 8 output for limit, home, or safety switches.

Upgrades / Options

Control2 - 3 Axis, CNC Control Software, Computer Cntl-02

750.00

Control3 - 3 Axis, CNC Control Software, Tool Probe & Home Switches Cntl-04

1,150.00

Control4 - 3 Axis, CNC Control Software, Computer, Tool Probe & Home Switches Cntl-04

1,450.00

     
Axis Add-Ons    
4th Axis with tailstock, drive added to controller, upgrade in software RT-4X

1,850.00

4thh and 5th Axis Trunnion table, drive added to controller, upgrade in software TT-5X

4,850.00

Kits and Options    
Jeweler's Kit -- 12 tools, round fixture, flat fixture, pressure gun, flat stock, round stock JK-01

750.00

Enclosure - For Mill/2, Mill/3 and Mill/GX EC-02

2,950.00

ATC - 5 tool for NSK E3000 Spindle ATC-NSK-3000

6,500.00

ATC - 5 tool for IMT Spindle ATC-IMT

7,500.00

Pneumatic Vise with vacuum pump PVAC-01

1,750.00

 

 

 

Control2 - 3 Axis, CNC Control Software, Computer Cntl-02

750.00

Control3 - 3 Axis, CNC Control Software, Tool Probe & Home Switches Cntl-04

1,150.00

Control4 - 3 Axis, CNC Control Software, Computer, Tool Probe & Home Switches Cntl-04

1,450.00

     
Axis Add-Ons    
4th Axis with tailstock, drive added to controller, upgrade in software RT-4X

1,850.00

4thh and 5th Axis Trunnion table, drive added to controller, upgrade in software TT-5X

5,400.00

Kits and Options    
Jeweler's Kit -- 12 tools, round fixture, flat fixture, pressure gun, flat stock, round stock JK-01

750.00

Enclosure - For Mill/2, Mill/3 and Mill/GX EC-02

2,950.00

ATC - 5 tool for NSK E3000 Spindle ATC-NSK-3000

6,500.00

ATC - 5 tool for IMT Spindle ATC-IMT

7,500.00

Pneumatic Vise with vacuum pump PVAC-01

1,750.00