Micro Table Top CNC Productivity Centers - Mills, Routers and Lathes             Machinist Tools
     Minitech CNC                   
 
Coming Soon the Minitech Micro-Turn GT10

Machine Options

 Rotary Table  Control Software Financing

Mini-Mill-1 CNC Micro Milling Machine

 

Run from  YOUR Desk Top PC or a Lap Top

Picture Shows Optional 4th Axis Rotary Table

The Minitech Mini Mill1 is our smallest and least expensive CNC milling machine.  Designed for Jewelers, Hobbyists and Educational use.

The MM 1 features a Thompson Rails on all three axis allowing for smooth non-stick slip movements.

Adjustable preload anti-backlash feed screws are used on the X- and Y-axes insuring accuracy and repeatability.

The "High Speed Spindle includes permanently lubricated bearings.

The MM-1 can machine everything from wax to nonferrous metals.

Also it can operate in Computer Controlled CNC mode, or Manually Controlled mode using Hand-Wheels.

You can even add a 4th Axis Rotary Table as Shown Above

Compact

Affordable $5,500.00 3 Axis

For the Serious Hobbyist .....finally you have a machine that is built tuff packed with all the features you would find in all of Minitech's Machines.

The Mini-Mill-1 series is the best machine in its class. 

Specifications

Table Size

13" x 2.75"

Max. Clearance, Table to Spindle

5"

Spindle Center to Column Face

3.25"

Travel X, Longitudinal

5"

Travel Y, Cross

5"

Travel Z, Vertical / Up and Down

5"

Hand-Wheel Graduations

0.001"

Spindle RPM, Variable by Potentiometer

500 - 3500 RPM (Optional 500-10,000 RPM)

Overall Width *

14.75"

Overall Depth *

11.75"

Overall Height *

20.75"

Table Fixture Clamping Provisions

Drilled and Tapped Holes

Spindle Capacity

Spindle use's Collets 3/32 to 1/8"

Lead Screw's

 ACME Precision Grade, 25.4 threads per inch, 0.2 threads per mm

                                   *Overall dimensions include motor and speed control

CNC Specifications for the Minitech-Mini-Mill

Software 

Windows Based, ISO  G&M Code-  MACH 3 Software
Controller Stepper controls with full, half and 1/10 micro stepping modes, 10 amps on each axis of control.  Parallel port interfacing with up to 45,000Hz bits per second kernel speed. 

Stepper Motor

250 oz. in., 400 steps per revolution, .9 degree - Hi Resolution Stepper Made by Eastern Air Device.

Resolution

.0005" Full Step, .00025" Half Step

Speeds

.1 to 55 ipm

Power Requirements

115VAC, 60 Hz --110 or 220 VAC, 50 Hz

Machine Weight

45 lbs.     

Electronics

PC Interface

Parallel Port, LPT1 or LPT2, Optically Isolated

Drive Type

High Output, Bi-Polar Driver

AC Relay

1 PC On/Off, IEC connectors, fused

Enclosure

Self-contained separate controller

Power Supply

Input Voltage

105 - 125 VAC, 60 Hz -- 110 or 220 VAC, 50 Hz

Output Voltage

13.8 VDC, 20 amps

Size/enclosure

5.0" x 9.0" x 10.5" -- separate, enclosed component

 

The Minitech Mini-Mill 1 Package

  • Mini-Mill/105 with PC interfacing (computer not included)

  • All Windows-based software and controls

  • User's guide

  • Collet Set

  • Hand-wheels on all axes for manually operating the machine when CNC controls are off

  • 1 year limited hardware warranty

  • Toll free customer support

Total  $5,500.00

Rotary Table - includes 3 Jaw chuck, 250 oz. in. 0.9 degree stepper motor, 4th axis micro stepping driver added to controller. Driver is 1/10 micro stepping, 10 amp. and Tail Stock Price $1,850.00

 

 

  

 

 

ORDER Now

702-400-3460